Automatic Gate Installation & Repairs in Brighton, Bayside Melbourne

It depends heavily on the gate type, size and the motor, but as a rough guide for bayside Melbourne: automating an existing suitable gate typically runs about $1,500–$4,000, a supplied-and-installed automatic driveway gate with automation more commonly falls in the $5,000–$15,000 range, and a large custom, double or cantilever gate on a grand Brighton frontage can run $15,000–$30,000 or beyond. The big variables are gate width and weight, the motor and battery backup, how far the power and intercom cabling has to run, and the ground conditions. We give a written quote after seeing the site rather than a number over the phone.

Yes, mobile gate repairs across bayside Melbourne are core to what we do, whatever brand of motor you have. The faults we see most around Brighton are flat or failed backup batteries, control boards corroded by salt air, motors that have taken water, worn drive gears, snapped sliding-gate racks, and photocells knocked out of alignment. First thing to try yourself: use the manual release key to disengage the motor so you can move the gate by hand and get your car in or out — then call us. We diagnose whether it's a repair or an end-of-life motor before any work goes ahead.

Sliding gates suit narrower blocks and driveways where there isn't room for a gate to swing without hitting a car, a wall or a heritage fence — they need clear space to one side to slide into. Swing gates suit the wider, flatter frontages common on the larger Brighton and Bayside blocks, and carry the classic entrance look, but they need level ground through the swing arc. We'll tell you which your site actually allows when we quote, rather than selling you a gate that fights your driveway.

There's no dedicated Victorian licence for installing a gate, but the part of the job that connects the motor to mains power must be done by a licensed electrician — that's non-negotiable. On heritage-overlay streets, or for a tall or solid front gate, the City of Bayside may require a planning permit before the gate goes up, so it's worth confirming with the council early. Beyond that, an automated gate carries real safety obligations: it has to be set up with force limiting and photocells so it can't crush or trap anyone. We handle the gate and coordinate the electrical side.

A properly installed automatic gate has a battery backup that keeps it working through short outages, and a manual release so you can open it by hand in a longer one. That matters in bayside Melbourne, where storms rolling in off the bay can drop power without warning — a gate with no backup and an owner who's never found the release key is how people end up locked in or out of their own driveway. We fit backup batteries and show you the manual release on handover so you're never caught out.